Pre-Programmed Controller For Standard HVAC-AHU Application  
Download Broucher
 
Instruction manual
 
Corrigo E comes with pre-programmed ready to - use applications for air handling, heating / domestic hot water control and boiler control.
The controller can be configured directly using the buttons and display, or on a PC via the (Etool© software).
The second generation of Corrigo E has improved communication speed. This can be very useful in large, integrated bus systems, e.g. Modbus systems, with SCADA.
Communication via RS485 (Modbus/EXOline),TCP/IP, LON.
One or two communication ports.
With or without built-in display, an external display unit can also be connected.
8, 15 or 28 I/Os with expansion possibilities.
 
Features :
Technical data    
Supply voltage   24 V AC ±15 %, 50...60 Hz or 20...36 V DC
Power consumption   8 VA, 4 W (DC) WEB models: 12 VA, 6 W (DC)
Ambient temperature   0...50°C
Storage temperature   -40...+50°C
Ambient humidity   Max. 90 % RH
Protection class   IP20 (E-DSP Ip44)
Memory back-up   Built-in long-life battery with long time back-up of all settings
Display   Backlit, LCD, 4 rows of 20 characters
Dimensions (WxHxD)   148 x 123 x 58 mm, 8.5 modules
Mounting   DIN-rail
Communication   RS485, EXOline (free protocol) and Modbus as standard. LON and TCP/IP as options.
Inputs    
Analogue inputs (AI)   For a PT1000 sensor or 0...10 V DC
Digital inputs (DI)   For potential-free contacts
Outputs    
Analogue outputs (AO)   0...10 V DC, 1 mA, short-circuit proof
Digital outputs (DO)   Mosfet 2 A each, max. 8 A total, 24 V AC or DC
 
Model Overview :
    E8D-S   E8-S   E15D-S   E152D-S   E15-S   E152-S   E28D-S   E282D-S   E28-S   E282-S
AI   2   2   4   4   4   4   4   4   4   4
DI   3   3   4   4   4   4   8   8   8   8
UI   -   -   -   -   -   -   4   4   4   4
AO   1   1   3   3   3   3   5   5   5   5
DO   2   2   4   4   4   4   7   7   7   7
LON   Option   Option   Option   -   -   -   Option   Option   -   -
TCP/IP(Web Server)
  Option   Option   Option   Option   Option   Option   Option   Option   Option   Option
Display   Yes   -   Yes   Yes   -   -   Yes   Yes   -   -
External display   -   Option   -   -   Option   Option   -   -   Option   Option
Dual ports   -   -   -   Yes   -   Yes   -   Yes   -   Yes
 
Accesories    
 
E tool© software
Corrigo E is delivered with the software E tool© which is used to configure and adjust the pre-installed applications and settings. You can conveniently prepare the settings in your office, and then load the settings into the controller during installation
EXOline - BACNet Converter
 
 
 
Disclaimer | Privacy © Copyright 2012 KAHAN CONTROLS. | Website Design by Om Sai Infotech